Internal cleaning scheme of mechanical seal

Internal cleaning scheme of mechanical seal

22/06/16 10:08:06

In order to effectively maintain the efficiency of mechanical seals during use, regular cleaning is very important. There are many types of equipment cleaning, and internal cleaning is a more common one. For more users to understand, the next Introduce the internal cleaning scheme of its products.

1. Cleaning

(1) Features: Using the sealed material of the working server, the inlet and outlet of the pump are introduced into the sealed chamber through the pipeline.

(2) Application: It is used to clean the liquid, p1 is slightly higher than p1, when the temperature is high or there is residue, cooling towers, filtering devices, etc. can be set on the pipeline

2. Anti-cleaning

(1) Special occupation: Use the sealed material of the working server to introduce the sealed cavity from the inlet and outlet of the pump, and flow to the pump channel through the pipeline after cleaning.

(2) Application: used to clean up the liquid, and p into

3. Full cleaning

(1) Special: Using the sealed material of the working server, the inlet and outlet of the submersible pump are introduced into the sealed cavity through the pipeline, and then economically managed to flow to the pump channel after cleaning.

(2) Application: The cooling effect is better than the first two, and it is used to clean liquid, and p1 is close to p-in and p-out.

The above is the introduction of the internal cleaning scheme of the mechanical seal. According to the introduction, the corresponding operation can better ensure the cleaning and efficiency of the seal.