how to repair the fresh water tank in an rv

Use at-repair small cracks or holes in fresh water tankshome methods.
Serious damage, however, requires professional repair or replacement.
There are several different RV tank patch products on the market.
Most products work well on ABS tanks, but only provide temporary results on polyethylene tanks.
The EternaBond tape works well on both types of tanks, is easier to use than most tank patch kits, and forms instant bonding.
The manufacturer of EternaBond claims that its adhesive tape is almost permanently attached to any surface except the silicone.
Difficulties: easily empty the fresh water tank, waiting for the tank to dry.
Use an automatic drill bit to drill holes at each end of the crack.
This prevents the spread of cracks.
Skip this step if you are repairing a hole.
Use acetone and a rag to remove dirt and debris from the tank area that needs to be repaired.
Cut a piece of EternaBond Tape 2 inch longer than the damaged area.
Cut the tape with a standard pair of scissors or a common knife.
Pull off the 1 inch EternaBond tape backing to reveal the adhesive.
Place the tape 1 inch away from the crack or hole.
Slowly press the tape on the damaged area of the tank with one hand, while removing the backing with the other hand until you drop the whole piece of tape.
Rub the entire surface of the tape back and forth with your hand, and keep the tape firmly in place.
Put a second piece of EternaBond tape on the first piece.
Wait 12 hours before filling the fresh water tank.
The \"tips and warnings\" article by Rose KiviRose kiivi has been written for more than 10 years.
She has a background in the area of care, wildlife restoration and habitat protection.
Kivi has written educational textbooks, patient care brochures, animal husbandry guides, outdoor survival manuals, and has written contributors to two books in Uncle John\'s Bathroom Reader series.