loading

Lepu Seal - A Professional China Mechanical Seal Manufacturer providing Cartridge Seal, Grundfos Mechanical Seal And We offer free sample!

Examples of industrial applications of liquid film mechanical seals (1)-

Examples of industrial applications of liquid film mechanical seals (1)

 2018-11-12  

Examples of industrial applications of liquid film mechanical seals (1):

At present, the medium delivery pump in the domestic latex production device is basically a centrifugal pump or a screw pump, and the shaft seal usually adopts a contact mechanical seal or a soft packing seal. If the ordinary contact mechanical seal is used, the latex is likely to self-aggregate on the end face of the friction pair under the action of frictional heat and adhere to the end face of the seal, leading to early failure of the seal and causing the latex to enter the bearing and cause damage; while the traditional The soft packing is sealed, but it cannot be cooled by water. On the one hand, it may cause serious abrasion and scorching of the packing. On the other hand, the latex medium leaks into the packing seal box and causes the packing to bond, causing it to fail quickly. Latex enters the bearing and causes damage. 2001 mechanical seal

Figures 4~25 show the shaft seal structure used on the centrifugal pump of a foreign-funded enterprise producing styrene-butadiene latex. It is an imported tandem bellows mechanical seal, and a certain pressure of flushing water is injected between the two sets of seals. Not long after the device was in operation, it was discovered that latex had leaked into the flushing water. In less than a month, the pump was stopped and the seal was replaced due to serious latex leakage. After opening the machine seal, it was found that the latex produced self-polymer (shown in Figure 4-26) on the two sealed end faces, which made the sealed end faces unable to fit tightly and leaked. The frequent failure of mechanical seals caused the annual cost of spare parts for a pump to exceed 200,000 yuan, and seriously affected the normal production.

Figure 4-25 Series contact bellows mechanical seal Figure 4-26 Self-polymerization of styrene butadiene latex on the sealing end surface

  978.html,

Application examples of tandem gas film mechanical seals    industrial application examples of liquid film mechanical seals (2)

GET IN TOUCH WITH Us
recommended articles
INFO-CENTER Blog Faq
Dry gas seals are an essential component in many industrial applications, including centrifugal compressors, pumps, and turboexpanders.
If you are looking for information on successful implementation of dry gas seals, you have come to the right place! In this article, we will explore a number of case studies that demonstrate the successful implementation of dry gas seals in various industrial applications.
Compressor dry gas seals are crucial components in many industrial and manufacturing processes.
The Impact of Compressor Dry Gas Seals on Performance

Gas seals are an essential component in compressor systems, and they play a crucial role in ensuring operational efficiency and performance.
When it comes to choosing the right compressor dry gas seal for your application, it's important to consider a variety of factors.
Compressor dry gas seals are critical components in ensuring the safe and efficient operation of centrifugal compressors.
When it comes to the oil and gas industry, ensuring the safety and reliability of equipment is of utmost importance.
For over a century, compressors have been an indispensable part of industrial processes, enabling the transformation of gases from low to high pressures, providing the necessary power for various applications.
The Lifecycle of a Compressor Dry Gas Seal: A Comprehensive Guide

Introduction

Gas seals are critical components of compressors in various industrial applications, including oil and gas, petrochemical, and power generation.
no data

Guangzhou Lepu Machinery Co., Ltd.
ADD.: No. 5, Yunkai Road, Huangpu District, Guangzhou, China
TEL.: +86-020-36158139, +86-020-36158280
Contact Person: Mr. Mark Ao
E-mail: mark@lepuseal.com;amy@lepuseal.com
FAX.: +86-020-36158281
SKYPE: lepu-seal
Whatapps:
+86-18903009893

Copyright © 2018 Guangzhou Lepu Machinery CO., LTD.  | Sitemap
Customer service
detect