Mechanical seal manufacturer: high temperature caused as a result of the mechanical seal cooling water

Mechanical seal manufacturer: high temperature mechanical seal cooling water caused as a result of the 2018 - 7 - 12 high temperature fault fault phenomenon caused by improper mechanical seal cooling water high temperature mechanical seal cooling water not more than 60 degrees higher than normal temperature. Now oil refining and chemical plants used for most of them adopt technology of circulating water pumps with mechanical seal cooling water, industrial circulating water with impurity is more, the long-term cycle after use, the dust accumulation, microorganism grows, the water of calcium carbonate in the most case of high temperature scale, pumps with mechanical seal failure. 1 reason analysis. Mechanical seal cooling water scale, scale, can make the seal ring jamming seal losing compensation, cause pumps with mechanical seal failure. 2. The impurity in the water entering the seals, pumps with mechanical seal failure. 3. Bellows mechanical seal, after fouling in cooling water accumulation between the peak and trough of corrugated pipe, corrugated pipe caused by loss of elasticity. 4. Spring mechanical seal ring because furring unsmooth loses elasticity. Solution 1. Improve water quality, change the industrial circulating water to soften water. 2. The magnetized water, achieve the goal of antiscale and corrosion. 3. Increase the mechanical seal cooling water coming water and water channels. Click more mechanical seal manufacturers information: /