Latest products
marine pollution control
by：Lepu Seal
2020-05-09
Oil spills are harmful to aquatic plants and wildlife, including fish, birds and humans.
Oil enters the waterway and affects drinking water.
Gasoline and oil are known to contain carcinogens.
Ocean oil leakage is an artificial danger that threatens the integrity of our lakes and streams.
The scope of these spills can range from small oil spills on yachts to larger and more severe oil spills on commercial vessels.
Controlling these potential dangerous spills is critical to the integrity of our waterways.
Marine pollution prevention includes oil control, bottom/water clean-up, fuel and oil spill clean-up Federal Water Pollution Control Act of 1972 and Oil Pollution Act of 1990 which prohibits discharge to or in United States navigable waters oil of any kind.
This includes any emissions that cause film, gloss, discoloration, sludge or emulsion on or below the surface of the water meter.
These types of discharge may result in severe civil penalties.
Problem: a quart of oil produces more than 2 acres of floating oil in diameter.
A gallon of fuel can pollute millions of gallons of water.
Gasoline and other petroleum products have a negative impact on the marine environment and must be controlled.
In order to prevent marine pollution, the bottom pad of the water tank absorbs petroleum products but does not absorb water.
When the bottom of the cabin is soaked with oil, it must be properly handled.
If they are not disposed of in an appropriate manner, they may be the main source of marine pollution as they collect oil, antifreeze, and transport fluid.
When the hatch pump is started, the liquid is pumped outside the ship.
Solution: bottom issue: oil leakage from marine engine fuel may overflow when putting gas into the engine.
Sometimes there is a tailgate in the fuel intake, or there is an overflow in the vent fittings.
This spill is harmful to aquatic life.
If you have an overflow, do not insert it into the water with a hose.
It is best to use the oil absorption agent to sweep to wipe the overflow liquid: use the oil absorption agent to sweep, the oil absorption agent will sweep, and the fuel will overflow into the water.
The suction strip is designed with built-in straps.
Absorption scans can be drawn on the surface of the water to absorb the wide sheens or surface spills.
This is a good way to clean up the oil spill on the water.
You should never disperse the oil with soap or detergent.
Detergents are dispersed in waterways and cannot be biodegradable.
Detergent is the main source of pollution. Solution-
2: The oil-absorbing agent BoomsOil oil-absorbing rod is very suitable for anti-overflow coating for marine and industrial use, and its structure is to wrap the high oil-absorbing agent polypropylene filler with a solid mesh shell.
Long nylon rope and steel hardware
Durable and easy to retrieve.
The oil-absorbing agent repels the water and does not sink even when saturated.
The diameter of the suction rod is 5 \"and 8\" and the length is 10 Ft. or 20 Ft.
Oil cleaning can be achieved by using an absorbent, gel and foam.
Sorbent is a compound that absorbs fixed oil through the surface and is considered to be the safest and most effective way to control marine pollution.
The oil-saturated absorbent can be unscrewed and reused on the waste oil recovery tank.
Keep in mind that materials soaked with oil are flammable.
Keep them away from the heat.
Oil enters the waterway and affects drinking water.
Gasoline and oil are known to contain carcinogens.
Ocean oil leakage is an artificial danger that threatens the integrity of our lakes and streams.
The scope of these spills can range from small oil spills on yachts to larger and more severe oil spills on commercial vessels.
Controlling these potential dangerous spills is critical to the integrity of our waterways.
Marine pollution prevention includes oil control, bottom/water clean-up, fuel and oil spill clean-up Federal Water Pollution Control Act of 1972 and Oil Pollution Act of 1990 which prohibits discharge to or in United States navigable waters oil of any kind.
This includes any emissions that cause film, gloss, discoloration, sludge or emulsion on or below the surface of the water meter.
These types of discharge may result in severe civil penalties.
Problem: a quart of oil produces more than 2 acres of floating oil in diameter.
A gallon of fuel can pollute millions of gallons of water.
Gasoline and other petroleum products have a negative impact on the marine environment and must be controlled.
In order to prevent marine pollution, the bottom pad of the water tank absorbs petroleum products but does not absorb water.
When the bottom of the cabin is soaked with oil, it must be properly handled.
If they are not disposed of in an appropriate manner, they may be the main source of marine pollution as they collect oil, antifreeze, and transport fluid.
When the hatch pump is started, the liquid is pumped outside the ship.
Solution: bottom issue: oil leakage from marine engine fuel may overflow when putting gas into the engine.
Sometimes there is a tailgate in the fuel intake, or there is an overflow in the vent fittings.
This spill is harmful to aquatic life.
If you have an overflow, do not insert it into the water with a hose.
It is best to use the oil absorption agent to sweep to wipe the overflow liquid: use the oil absorption agent to sweep, the oil absorption agent will sweep, and the fuel will overflow into the water.
The suction strip is designed with built-in straps.
Absorption scans can be drawn on the surface of the water to absorb the wide sheens or surface spills.
This is a good way to clean up the oil spill on the water.
You should never disperse the oil with soap or detergent.
Detergents are dispersed in waterways and cannot be biodegradable.
Detergent is the main source of pollution. Solution-
2: The oil-absorbing agent BoomsOil oil-absorbing rod is very suitable for anti-overflow coating for marine and industrial use, and its structure is to wrap the high oil-absorbing agent polypropylene filler with a solid mesh shell.
Long nylon rope and steel hardware
Durable and easy to retrieve.
The oil-absorbing agent repels the water and does not sink even when saturated.
The diameter of the suction rod is 5 \"and 8\" and the length is 10 Ft. or 20 Ft.
Oil cleaning can be achieved by using an absorbent, gel and foam.
Sorbent is a compound that absorbs fixed oil through the surface and is considered to be the safest and most effective way to control marine pollution.
The oil-saturated absorbent can be unscrewed and reused on the waste oil recovery tank.
Keep in mind that materials soaked with oil are flammable.
Keep them away from the heat.
Custom message
