Lepu Seal - A Professional China Mechanical Seal Manufacturer providing Cartridge Seal, Grundfos Mechanical Seal And We offer free sample!

Dry Gas Seal

how to service small pressure relief solenoid valves

by:Lepu Seal     2020-01-09
Small pressure relief solenoid valves are not highly complex machines, so if something goes wrong with your machine, you will most likely serve them without the help of a professional.
The small pressure relief solenoid valve is an electronic device that regulates the flow of the medium (usually water or gas.
The solenoid coil uses energy to mechanically open and close the valve through the flip of the switch.
Sometimes they may use metal or rubber seals or even interfaces to make it easier for you to control them.
When the valve is not activated, it is also possible to use the spring to keep it in the position of opening or closing.
To prevent the media from passing through the valve, the diaphragm is used.
The pressure on both sides of the diaphragm is equal, and the diaphragm closes the valve from any flow.
As you can imagine, because the small pressure relief solenoid valve has so many small working parts, there is a great chance that things will go wrong.
While this is rare, it is sometimes necessary to understand the basics of how to serve them.
If any of the holes on the diaphragm are blocked in some way, this can seriously damage the normal operation of the equipment.
This problem can usually be solved by simply opening the valve and cleaning the diaphragm and its seat.
Simply unscrew the bolts and separate the two main parts from each other to easily open them.
One easy way you can test if your small pressure relief solenoid valve is working is to turn them on and off, and then listen, that\'s the lift of the diaphragm.
If you do not hear this click, then it is very likely that it is not powered on due to poor wiring or faulty solenoid.
Do not try to repair the solenoid if it no longer works;
It may not be able to fix if it is damaged and should be replaced simply.
You may be interested in Asco solenoid valves when looking for alternatives, as they are industry-leading companies.
The same is true of the Pistons usually found in hydraulic solenoid valves.
If it gets stuck, causing the machine to not work and cleaning it doesn\'t improve the situation, just replace it.
These Pistons are sometimes held together with the springs, so make sure the springs don\'t pop up and lose when removing them.
If, after cleaning the hydraulic solenoid valves, they are found to work well now, then something in your water supply system may clog it.
Installing a filter upstream of the valve may be in your best interest so that it will not be a repeat event.
Because the cost of replacing a small pressure relief solenoid valve is more expensive than one of these filters, you will eventually lead.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...