Replace any O-ring or seal that appears to be less than good. The Vaseline takes time to deteriorate rubber and other compound o rings and gaskets. Just wipe them down and take away the residue with heat water and dish soap. The gasket within the D E filter must be good with a little lube for installation. Also, I am not a mechanic or a rubber scientist, but the rubbers used in pool filters and diesel engines probably use totally different compound buildings.

Anyone that submerged a motherboard in mineral oil for more than a month finally had the rubber seals on the bottom of the capacitors flip to mush and they would slide right off their pins. It comes with a variety of components for numerous functions. But yes the vast majority of lithium greases will work fine with plastics so I'll add it to the listing. Silicone grease doesn't hurt rubber so it goes properly with rubber. Plus some silicone grease is non-toxic that's the reason it's being used on meals machineries.

Everything from meals grade rubber gasket lube to dielectric grease to warmth switch grease. I did a search online, and folks have requested this query with out getting a solid reply.

I realized that the lubricant incorporates stuff other than silicone in the aerosol spray. Silicone grease may be exhausting to take away and may hurt car paint. Different manufacturers of silicone lubricant can affect the rubber in a different way in the long run. Inspect the O-rings and seals each time you assemble or take down your pool. Clean the parts with warm water and mild detergent solely.

Silicone grease, however, works better in low temperature, low stress purposes round plastics and rubber. Because lithium grease is petroleum primarily based, it is not really helpful to be used round plastics and rubber the place it will cause these to prematurely fail. I can tell you that the automotive dielectric grease I used to lube flashlight o-rings was scurvy stuff for that function.