When purchasing and using seals, users should always pay attention to the following requirements to avoid unnecessary quality problems: 1. After strict selection and long-term experience accumulation, we have produced a series of mechanical seals for kettles. Our supply channel is the most comprehensive in the seal industry, so in terms of production quality, we can well check and maintain a stable and high-quality level. Coupled with our insistence on the quality of seals, we will not blindly pursue high profits and sacrifice the customer's requirements for the quality of seals. 2. Storage If we stand in the customer's position and produce seals, we must use mechanical seals. Pay attention to whether the supplier or seal store knows how to take care of the seals. If the supplier does not store the seal properly, it may be handed over to the customer. Scrap seals have a set of specific requirements for storing seals. For example, the storage room temperature is preferably below 30 degrees Celsius to avoid high temperature aging of seals; seals must be stored in airtight packaging to avoid water in the air. The seals must be protected from strong light exposure to prevent the seals from being eroded by ozone in the air or prematurely aging. Therefore, we recommend that customers must check whether the seals are properly stored when choosing a supplier for purchase. Otherwise, no matter what the seals are No matter how high-quality seals can be provided by the manufacturer, it may be only the scrapped seals that are delivered to the customer. 3. While using high-quality seals in the design, many customers choose lower-grade products in the guide and dust-proof links in order to reduce costs, resulting in the leakage of the tie-rod seal due to cylinder swing or foreign debris. , ask us about the product to avoid wasting high quality seals. 4. The most important thing when installing the seal is to avoid damage to the seal. In addition to the appropriate finish, safe chamfering, deburring, and appropriate tools, how to avoid dust floating on the seal during installation Surface, when installed, such as how to properly place the piston seal to avoid crushing the seal, clean hydraulic media, etc. If the user has any questions about this, we can provide my seal manufacturer with clear and simple installation instructions. 5. After a lot of use, after the user completes the process, even if the equipment has passed the test, there will still be problems after it is delivered to the user for a period of time. In general, it may be caused by improper use, such as the oil temperature is too high to cause sealing If the parts are burnt, you can check whether the cooling system is operating normally, the surface of the tie rod is worn and leaking, you can check whether there is debris in the hydraulic oil, and whether the filter is invalid. It can be seen from the above situations that even if users are willing to pay a higher price to purchase high-quality seals, they must be controlled and monitored in all aspects to ensure that the investment will not be wasted. It is necessary to choose professional manufacturers and establish long-term partners. very necessary.
